Go To
How To Choose

Transportation-Intersection-Expressway Connectivity Quick Reference Guide

This Quick Reference Guide lists EtherWAN’s best-selling network connectivity products for Intelligent Transport Systems (ITS). Through a few simple steps, you’ll be able to select the right EtherWAN product according to your requirements. If you need further assistance, please don’t hesitate to contact our sales department.

Information needed to select the proper Power over Ethernet (PoE) or non-PoE Switch:

  1. How many cameras are you connecting?
  2. Are the devices 10/100 Fast Ethernet (FE) or 10/100/1000 Gigabit Ethernet?
  3. Will you need room for additional cameras (expansion) in the future?
    1. It is always a good practice to have some extra PoE ports available for future expansion.
  4. Do you require Fiber Optic connectivity?
    1. If so, what type of fiber optics will be used? Single Mode (SM), Multi Mode (MM), or Wavelength-division Multiplexing (WDM)?
    2. What speed (FE/GE) and distance? What type of connectors (SC, ST, LX, LC, SFP, etc..) are needed?
      1. 100M Fiber
        SFP mode for variable distance
        2Km Multi mode (MM)
        10Km Single mode (SM)
        20Km Single mode (SM)
      2. 100M Fiber
        SFP mode for variable distance
        550m Multi mode (SX)
        10Km Single mode (LX)
        20Km Single mode (LX)
  5. Are you connecting a network uplink to a central office and downlink to next switch?
    1. If yes, you need two extra ports for network uplink & downlink. Calculate total bandwidth for all devices in order to choose uplink & downlink ports bandwidth.
  6. Does your network application require redundancy?
    1. If, yes, choose a managed switch that supports the EtherWAN Alpha-Ring protocol, RSTP, or STP.
  7. Are you connecting devices that require active PoE (802.3af or 802.3at), such as Wireless AP (WAP), IP cameras, digital displays or VoIP phones?
    1. If yes, what is the maximum power draw (wattage) of each PoE device? Refer to the datasheet for the camera or the manufacturer’s website.
    2. If the wattage of all devices is below 15.4W, then an IEEE802.3af PoE switch should be sufficient.
    3. If the wattage of any connected device is greater than 15.4W, then choose an IEEE802.3at PoE switch.
    4. If the wattage of any device is greater than 30W, then consider purchasing an ultra-PoE switch.
    5. Add up total wattage from all cameras. This figure will be used to determine the required PoE power budget.
  8. Make sure you select a switch that has a large enough PoE Power Budget to cover the total power draw calculated in #7-e above. It is a good practice to allow for 20% overage on the power budget.
    1. Example: Each camera draws 12 Watts x 8 cameras = 96W. After adding a 20% margin, a 115.2W minimum PoE budget is recommended.
  9. Managed vs. Unmanaged switch? We always recommend at least Web-Smart management, as this allows for troubleshooting as well as remote power cycling of individual devices. A managed switch is also required if VLAN, QoS, Redundancy, or Security is required.
  10. Installation Location:
    1. Outdoor Deployment : Operating Temperature -40 ~ 75°C (-40 ~ 167°F).
    2. Indoor deployment with air conditioning: Operating Temperature 0 ~ 45°C (0 ~ 113°F).
    3. Indoor Deployment without air conditioning: Operating Temperature -10 ~ 60°C (14 ~ 140°F).
  11. Consider purchasing a surge protector if the Ethernet cables will be run outside of a building.
  12. In addition, you can use this web site to easily search.
    http://www.etherwan.com/product-selector/ethernet-switches
  • Hardened Din Rail and non- PoE Switches (-40~75 °C)
  • Hardened Rackmount PoE and Non-PoE Switches
  • Media Converters
  • Ethernet Extenders
  • SFP Modules
  • Power Supplies
  • Surge Protector
  • Wayside Connectivity for End Device Connectivity

    • Hardened Din Rail and non- PoE Switches (-40~75 °C)
    Note: Power Supplies Sold Separately for Din-Rail Switches

    Part #

    Ports

    Description

    EX78931-0VB 

    12 GT(8 x PoE++), + 4 GE SFP 

    Managed 12 GT (8 PoE++ 60W), + 4 GE SFP, 240W Power Budget , 52 – 57VDC Power Input

    EX78802-01B 

    8 TX PoE+, + 2 GE 

    Managed 8 10/100TX PoE+(30W), 2 GT, 180W Power Budget , 47 – 57VDC Power Input

    EX78802-0VB 

    8 TX PoE+, + 2 GE SFP 

    Managed 8 10/100TX PoE+(30W), 2 GE SFP, 180W Power Budget , 47 – 57VDC Power Input

    EX78602-01B 

    6 TX PoE++, + 2 GT 

    Managed 6 10/100TX PoE++(4x 30W+2x 60W) + 2 GT, 180W Power Budget, 52 – 57VDC Power Input

    EX73931-0VB

    12 GT + 4 GE SFP

    Managed Lite Layer 3 (LL3) Switch; 12 GT + 4 GE SFP, 12 – 48VDC Power Input

    EX71802-0VB

    8 TX + 2 GE SFP

    Managed 8 10/100TX + 2 GE SFP, 12 – 48VDC Power Input

    EX71802-0AB

    8 TX + 2 GE Fiber LX 10Km SC

    Managed 8 10/100TX + 2 GE Fiber Single-Mode 10Km SC, 12 – 48VDC Power Input

    EX71620-10B

    6 TX + 2 Fiber MM 2Km SC

    Managed 6 10/100TX + 2 100FX Fiber Multi-Mode 2Km SC, 12 – 48VDC Power Input

    EX71620-A0B

    6 TX + 2 Fiber SM 20Km SC

    Managed 6 10/100TX + 2 100FX Fiber Single-Mode 20Km SC, 12 – 48VDC Power Input

    EX71440-10B

    4 TX + 4 Fiber MM 2Km SC

    Managed 6 10/100TX + 4 100FX Fiber Multi-Mode 2Km SC, 12 – 48VDC Power Input

    EX71440-A0B

    4 TX + 4 Fiber SM 20Km SC

    Managed 6 10/100TX + 4 100FX Fiber Single-Mode 20Km SC, 12 – 48VDC Power Input

    EX73402-01B

    16 TX + 2 GT

    Managed 16 10/100TX + 2 GT, 12 – 48VDC Power Input

    EX73402-0AB

    16 TX + 2 GE Fiber LX 10Km SC

    Managed 16 10/100 TX + 2 GE Fiber Single-Mode 10Km SC, 12 – 48VDC Power Input

    EX73242-1AB

    12 TX + 4 Fiber MM 2Km SC + 2 GE Fiber LX 10Km SC

    Managed 12 10/100 TX + 4 100FX Fiber Multi-Mode 2Km SC + 2 GE Fiber Single-Mode 10Km SC, 12 – 48VDC Power Input

    EX46908A-0-J

    8 GT PoE+ 

    Unmanaged 8 GT PoE+(30W) 120W PoE Power Budget, 18 - 57VDC Power Input 

    EX46928A-V-J

    8 GT PoE+ , + 2 GE SFP

    Unmanaged 8 GT PoE+(30W) + 2 GE SFP, 120W PoE Power Budget, 18 - 57VDC Power Input 

    EX46928A-A-J

    8 GT PoE+ , + 2 GE Fiber LX 10Km SC

    Unmanaged 8 GT PoE+(30W) + 2 GE Fiber Single-Mode 10Km SC, 120W PoE Power Budget, 18 - 57VDC Power Input

    EX45905 

    5GT (4 x PoE+)

    Unmanaged 5 GT (4 ports PoE+ 30W) , 120W PoE Power Budget, 24/48VDC Power Input 

    EX45915-V 

    5GT (4 x PoE+) + 1 GE SFP 

    Unmanaged 5 GT (4 ports PoE+ 30W) + 1 GE SFP, 120W PoE Power Budget, 24/48VDC Power Input 

    EX45915-A

    5GT (4 x PoE+) + 1 GE Fiber LX 10Km SC

    Unmanaged 5 GT (4 ports PoE+ 30W) + 1 GE Fiber Single-Mode 10Km SC, 120W PoE Power Budget, 24/48VDC Power Input

    EX42305 

    4TX (4 x PoE+)+1 GT

    Unmanaged 4 10/100TX (4 ports PoE+ 30W)+ 1GT, Din-Rail, 120W Power Budget, 24/48VDC Power Input 

    EX42315-V 

    4TX (4 x PoE+)+1 GT + 1GE SFP 

    Unmanaged 4 10/100TX (4 ports PoE+ 30W)+ 1GT +1 GE SFP, 120W Power Budget, 24/48VDC Power Input

    EX42315-A

    4TX (4 x PoE+)+1 GT + 1GE Fiber LX 10Km SC

    Unmanaged 4 10/100TX (4 ports PoE+ 30W)+ 1GT +1 GE Fiber Single-Mode 10Km SC, 120W Power Budget, 24/48VDC Power Input

    Hardened Rackmount PoE and Non-PoE Switches (-40~75 °C)
    Note: Power Supplies Sold Separately for Din-Rail Switches

    Part #

    Ports

    Description

    EX76402-01TT

    16 TX PoE+, + 2 GT

    Managed 16 10/100TX PoE+(30W) + 2 GT, 480W PoE Budget, 48-57VDC Power Input 

    EX76402-0ATT

    16 TX PoE+, + 2 GE Fiber LX 10Km SC

    Managed 16 10/100TX PoE+(30W) + 2 GE Fiber Single-Mode 10Km SC, 246.4W PoE Budget, 48-57VDC Power Input 

    EX75604-04VGT 

    24 TX PoE+, + 4 GE SFP 

    Managed 24 10/100TX PoE+(30W) + 4 GE SFP, 420W PoE Budget, 48-57VDC Power Input 

    EX77604-00VC 

    24 TX  + 4 GE SFP Combo 

    Managed 24 10/100TX + 4 GE SFP Combo, 48VDC or 90-264VAC Power Input 

    EX89000-00C

    Up to 24 FE + 4 GE

    Managed Modular 1U Chassis Switch, Modules Ordered Separately, 48VDC or 90 - 264VAC Power Input

    Media Converters
    Note: Power Supplies Sold Separately for Din-Rail Media Converters

    Part #

    Ports

    Description

    EL100C 

    1 TX, 1 Fiber MM 2Km SC 

    Commercial Unmanaged 10/100TX to 100FX Multi-Mode 2Km SC, Power Adapter Included 

    EL100C-20

    1 TX, 1 Fiber SM 20Km SC 

    Commercial Unmanaged 10/100TX to 100FX Single-Mode 20Km SC, Power Adapter Included 

    EX42011-1A-1-A 

    1 TX, 1 Fiber MM 2Km SC 

    Industrial Unmanaged 10/100TX to 100FX Multi-Mode 2Km SC, Power Adapter Included 

    EX42011-2A-1-A

    1 TX, 1 Fiber SM 20Km SC 

    Industrial Unmanaged 10/100TX to 100FX Single-Mode 20Km SC, Power Adapter Included 

    EL900-A-B-1-A 

    1 TX, 1 Fiber MM 2Km SC 

    Hardened Din-Rail Unmanaged 10/100TX to 100FX Multi-Mode 2Km SC, 10-48VDC Power Input  

    EL900-A-N-1-A 

    1 TX, 1 Fiber SM 20Km SC 

    Hardened Din-Rail Unmanaged 10/100TX to 100FX Single-Mode 20Km SC, 10-48VDC Power Input  

    EM1100TLC-10

    1 GT, 1 GE Fiber LX 10Km SC

    Commercial Unmanaged 10/100/1000TX to GE Fiber Single-Mode 10Km SC, Power Adapter Included

    EL2315 

    1 GT, 1 100BASE/1000BASE-X Dual Rate SFP

    Commercial Unmanaged 10/100/1000TX to 100BASE/1000BASE-X Dual Rate SFP, Power Adapter Included 

    EL9100-A1B 

    1 GX, 1 Fiber LX 10Km SC 

    Hardened Din-Rail Unmanaged 10/100/1000TX to GE Fiber Single-Mode 10Km SC, 12-48VDC Power Input  

    EMC400-EPWS

    4-Bay 

    Commercial 4-slot Din-Rail Media Converter Chassis with two DR-30-12 Power Supplies in the Package

    EMC1600 

    16-Bay 

    Commercial Media Converter Chassis. 19" Rack Mount Redundant Power Supplies, 100VAC - 260VAC 

    Ethernet Extenders
    Note: Power Supplies Sold Separately for Din-Rail Ethernet Extenders

    Part #

    Ports

    Description

    ED3501-U 

    1 TX, 1 Copper pair 

    Unmanaged 1 10/100TX Port to 1 Copper Pair, Power Adapter Included

    ED3541-00B 

    1 TX, 1 Copper pair 

    Hardened Din-Rail Unmanaged 10/100TX Port to 1 Copper Pair, PSU Sold Separately 

    ED3575-622

    6 FE, 2 GE, 2 Copper

    Hardened Din-Rail Managed 6 10/100TX + 2 GE SFP Combo + 2 Copper Pair, PSU Sold Separately

    ED3238-TRU

    1 TX PoE, 1 Coaxial

    Unmanaged 10/100TX PoE (15.4W) Ethernet Extender over RG6, RG11, or RG59 Coaxial Cable, included one ED3238T, one ED3238R and Power Adaptor, USA Type

    ED3638

    1 TX PoE+, 1 Coaxial 

    Hardened Din-Rail Unmanaged 10/100TX PoE+ (30W) Ethernet Extender over RG6, RG11, or RG59 Coaxial Cable, included one ED3638T, one ED3638R , PSU Sold Separately

    ED3538

    1 TX PoE+, 1 Copper

    Hardened Din-Rail Unmanaged 10/100TX PoE+ (30W) Ethernet Extender over Copper pair , included one ED3538T, one ED3538R, PSU Sold Separately

    SFP Modules

    Part #

    Ports

    Description

    EX-1250TSP-MB2L-AS 

    1 GE SFP 

    SFP Module, Hardened (-40°C - 85°C) Gigabit, Duplex LC, 1310nm, 2Km 

    EX-1250TSP-MB4L-AS 

    1 GE SFP 

    SFP Module, Hardened (-40°C - 85°C) Gigabit, Duplex LC, 1310nm, 10Km 

    EX-1250TSP-MB5L-AS 

    1 GE SFP 

    SFP Module, Hardened (-40°C - 85°C) Gigabit, Duplex LC, 1310nm, 20Km 

    EX-LS38-C3L-TI-N-CE

    1 GE SFP

    SFP Module, Hardened (-40°C - 85°C) GE, DDM, Single LC, TX:1310nm, RX:1550nm 40Km

    EX-LS48-C3L-TI-N-CE

    1 GE SFP

    SFP Module, Hardened (-40°C - 85°C) GE, DDM, Single LC, TX:1550nm, RX:1310nm 40Km

    EX-LS48-C3U-TI-N-EB

    1 GE SFP

    SFP Module, Hardened (-40°C - 85°C) GE, DDM, Duplex LC, 1550nm, 70Km

    Power Supplies

    Part #

    Volts/Watts

    Description

    SDR-240-48 

    48-55VDC/240W 

    Hardened Din-Rail PSU 88-264VAC(47-63Hz) or 124-370VDC Input, 48-55VDC Output 

    SDR-480-48 

    48-55VDC/480W 

    Hardened Din-Rail PSU 90-264VAC(47-63Hz) or 124-370VDC Input, 48-55VDC Output 

    Surge Protector

    Part #

    Description

    PD1041

    Hardened RJ45 Surge Protection Device

    PD3041

    Hardened Copper Wire RJ11 Surge Protection Device

    Wayside Connectivity for End Device Connectivity

    Number of Cameras, 1 NVR, 1 Uplink

    Recommendation

    Up to 8 end devices

    EX71800-00B Managed 8 10/100TX (-40~75°C)

    Up to 8 end devices + 2G Uplinks

    EX71802-0VB Managed 8 10/100TX + 2 GE SFP (-40~75°C)

    Up to 12 GE end devices, 4G Fiber Uplink Ports

    EX73931-0VB Managed 12 10/100/1000TX + 4 GE SFP Lite L3 Switch (-40~75°C)

    Case I. 4 PTZ Cameras, 2-4 Non PTZ Cameras, 4 Uplinks Case II. 4 APs with heater, 4 Uplinks
    (Choose 60W PoE Switch for over 30W PoE PD camera or AP)

    EX78931-0VB Managed 12 10/100/1000TX PoE++ (8x60W) + 4 GE SFP uplinks, 240W Power Budget (-40~75°C)

    Case I. 2 PTZ Cameras + 2-4 Non PTZ Cameras, 2 Uplinks Case II. 2 APs with heater+ 2-4 Non PTZ Cameras, 2 Uplinks
    (Choose 60W PoE Switch for over 30W PoE PD camera or AP)

    EX78602-0VB Managed 6 10/100TX PoE++(4x 30W+2x60W) + 2 GE SFP uplinks, 180W PoE Power Budget (-40~75°C)

    Up to 8 Cameras or Wireless APs with PoE, 2 Uplinks

    EX78802-0VB-T Managed 8 10/100TX PoE+(30W) + 2 GE SFP, 180W PoE Power Budget (-40~75°C)

    Up to 4 Cameras or Wireless APs With PoE, 1 Uplink

    EX45915-V Unmanaged 5 10/100/1000TX (4 x PoE+ 30W) + 1 GE SFP, 180W PoE Power Budget (-40~75°C)

    Attachmentサイズ
    transportation-intersection-expressway.pdf191.22 KB
    history