EasyLink MP

NEW

Preconfigured Multipoint IP67 Wireless Bridge Kit

Available in North America only

Easy set up - just power and align using supplied PoE injectors and power supplies

Highly secure with encrypted & authenticated Wireless Connection (WPA2)

Hardened-grade for outdoor & harsh environments

Downloads

Datasheet

Easy

Mount units to a pole or wall using included mount kit
Signal strength LED's for easy alignment
Just power and align using supplied PoE injectors and power supplies
No technical expertise needed

Highly Secure

Encrypted & Authenticated Wireless Connection (WPA2)
Every kit has unique SSID and security settings
Management Frame Protection (MFP) enabled

Hardened-Grade for Outdoor & Harsh Environments

Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
Wide operating temperature range (-40 to 167°F)
Connections up to 2 miles away

EtherWAN’s EasyLink is a pre-configured Multipoint Bridge kit which allows for connecting a set of remote
locations wirelessly up to 2 miles away. EasyLink MP’s simple setup allows you to connect locations by mounting the hardware, powering them on, and aligning the units using the built-in alignment LEDs. Each kit contains one central bridge unit plus two/four/six auxiliary units that connect automatically using a highly secure, unique, and hidden SSID and randomly generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

EtherWAN — "When Connectivity is Crucial."

Wireless

Frequency 5 GHz
Max data rate 300 Mbit/s
Number of chains: 2 per unit
Standards 802.11a/n
WPA2 Passphrase
256-bit AES-CCM Encryption
Dynamic Frequency selection

Layer 2 Features

Auto-negotiation for port speed and duplex
Redundant Protocols (always enabled)
- IEEE 802.1D STP
- IEEE 802.1w RSTP
- IEEE 802.1s MSTP

Interface

Ethernet
- Primary Node: 10/100/1000BASE-T Active PoE 802.3at/bt
- Auxiliary Node: 10/100/1000BASE-T
Wireless
- 802.11a/n
LED Indicators

Technology

Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x full duplex and flow control
- IEEE 802.1D STP
- IEEE 802.1s MSTP
- IEEE 802.1w RSTP
- IEEE 802.11w Management Frame Protection (MFP)
Power
- Primary Node:
  PoE in (Active PoE 802.3at/bt)
  Max power consumption 17W
- Auxiliary Node:
  PoE in (Passive PoE)
  PoE in input Voltage 6-30V
  Max power consumption 11W

Physical

Primary Node
- Dimensions
  - 270 x 565 x 76mm (W x H x D)
    10.63” x 22.25” x 3”
- Weight (shipping)
  - 6.2lbs (2.81kg)
- Installation Type
  - Pole/Wall
- Casing Material
  - UV Protected Polystyrene case
- Auxiliary Node
  - Dimensions
    - 185 x 185 x 63.5mm (W x H x D)
      7.28” x 7.28” x 2.5”
  - Weight (shipping)
    - 2 units per box: 7.15lbs (3.25kg)
  - Installation Type
    - Pole/Wall
  - Casing Material
    - UV Protected Polystyrene case
Environmental
- Operating Temp.
  - -40 to 75°C (-40 to 167°F)
- Storage Temp.
  - -45 to 85°C (-49 to 185°F)
- Relative Humidity
  - 5% to 95% (non-condensing)
- Wind Survivability
  - 200km/h
Regulatory
- ISO
  - Manufactured in ISO-9001 facility
- EMI
  - FCC Part 15B Class A
  - PCC Part 15C
Environmental Test Compliance
- IEC 60068-2-6 Fc (Vibration Resistance)
- EN 61000-4-3 (Radiated RFI)
Warranty
- Length
  - 3 years
- Details
  - https://etherwan.com/support/warranty-policy

Unit Connected

Unit Mounted

Auxiliary Node Performance

VSWR
- < 2.0@ 5-5.9GHz
Dual polarized
- Horizontal & Vertical
High gain
- Up to 13dBi
Front to Back Ratio
- >20dB
Port isolation
- >30dB

Auxiliary Node Electrical Specification

Frequency Range
- 5-5.9 GHz
Gain
- 13dBi typ.
Polarization
- Dual linear-V & H
Beamwidth Horizontal
- 37 deg@ -3dB
Beamwidth Vertical
- 37 deg @ -3dB
VSWR
- <2.0 typ.
Impedance
- 50 Ohm
RF Interface
- 2 x SMA Female
Front-to-Back Ratio
- >20dB
Port-to-Port Isolation
- >30dB

Primary Node Specifications

VSWR
- 2.5: 1 Max.
Polarization
- Linear & Vertical
Peak gain
- 8 dBi
Average gain
- 6 dBi
Frequency range
- 5150 - 5875 MHz
Power handling
- 2W (cw)
Impedance
- 50 Ω
Connector
- N PLUG

Primary Node Environmental & Mechanical Characteristics

Temperature
- -40°C to +85°C
Humidity
- 90% @ 25°C

Primary Node Omni-directional Antenna

Gain - Azimuth & Elevation - Port 1

Gain - Azimuth & Elevation - Port 2

Auxiliary Node Panel Antenna

3D Gain - Port 1

3D Gain - Port 2

Model

EasyLink-300-US-MP-02	2 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 3 x 24VDC, 1.5A Power Supplies, 3 x Passive PoE Injectors and 3 x Mounting kits.
EasyLink-300-US-MP-04	4 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 5 x 24VDC, 1.5A Power Supplies, 5 x Passive PoE Injectors and 5 x Mounting kits.
EasyLink-300-US-MP-06	6 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 7 x 24VDC, 1.5A Power Supplies, 7 x Passive PoE Injectors and 7 x Mounting kits.