Go To

EasyLink Series

NEW
Preconfigured IP67 Wireless Bridge Kit
IP67
Available in North America only
Highly Secure
Hardened-Grade for Outdoor & Harsh Environments
Downloads
DatasheetQIG
Inquiry

Easy

  • Mount units to a pole or wall using included mount kit
  • Signal strength LED's for easy alignment
  • Just power and align using supplied PoE injectors and power supplies
  • No technical expertise needed

Highly Secure

  • Encrypted & Authenticated Wireless Connection (WPA2)
  • Every kit has unique SSID and security settings

Hardened-Grade for Outdoor & Harsh Environments

  • Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
  • Wide operating temperature range (-40 to 167°F)
  • Connections up to 2 miles away

What's Included

  • 2 x units preconfigured to connect with optimal performance up to 300Mbps
  • Includes all Mounting Hardware
  • Includes 2 x power supplies and 2 x PoE injectors

EtherWAN's EasyLink is a pre-configured point to point (PtP) Bridge kit which allows for connecting remote locations wirelessly up to 2 miles away. EasyLink's simple setup allows you to connect locations by mounting the hardware, powering them on and aligning the units using the built-in alignment LEDs. Each kit contains two paired units that connect automatically using a highly secure, unique, hidden SSID and randomly-generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

EtherWAN — "When Connectivity is Crucial."

Wireless

  • Frequency 5 GHz
  • Max data rate 300 Mbit/s
  • Number of chains: 2
  • Standards 802.11a/n
  • WPA2 Passphrase
  • 256-bit AES-CCM Encryption
  • Dynamic Frequency selection

Layer 2 Features

  • Auto-negotiation for port speed and duplex
  • Redundant Protocols (always enabled)
    • IEEE 802.1D STP
    • IEEE 802.1w RSTP
    • IEEE 802.1s MSTP

Interface

  • Ethernet
    • 10/100/1000BASE-T Passive PoE
  • Wireless
    • 802.11a/n
  • LED Indicators

Technology

  • Standards
    • IEEE 802.3 10BASE-T
    • IEEE 802.3u 100BASE-T
    • IEEE 802.3ab 1000BASE-T
    • IEEE 802.3x full duplex and flow control
    • IEEE 802.1D STP
    • IEEE 802.1s MSTP
    • IEEE 802.1w RSTP
    • IEEE 802.11w Management Frame Protection (MFP)
  • Power
    • PoE in (Passive PoE)
    • PoE in input Voltage 6-30V
    • Max power consumption 10W

Physical

  • Casing Material
    • UV Protected Polystyrene case
  • Dimensions
    • 185 x 185 x 63.5mm (W x D x H)
      7.28" x 7.28" x 2.5"
  • Weight (shipping)
    • 5.3lbs (2.4kg)
  • Installation Type
    • Pole/Wall

Environmental

  • Operating Temp.
    • -40 to 75°C (-40 to 167°F)
  • Storage Temp.
    • -45 to 85°C (-49 to 185°F)
  • Relative Humidity
    • 5% to 95% (non-condensing)
  • Wind Survivability
    • 200km/h
      *Power supply rated 5 to 158°F

Regulatory

  • ISO
    • Manufactured in ISO-9001 facility
  • EMI
    • FCC Part 15B Class A
    • PCC Part 15C

Environmental Test Compliance

  • IEC 60068-2-6 Fc (Vibration Resistance)
  • EN 61000-4-3 (Radiated RFI)

Warranty

<

Unit Connected

Unit Mounted

 

Performance

  • VSWR
    • < 2.0@ 5-5.9GHz
  • Dual polarized
    • Horizontal & Vertical
  • High gain
    • Up to 13dBi
  • Front to Back Ratio
    • >20dB
  • Port isolation
    • >30dB

Electrical Specification

  • Frequency Range
    • 5-5.9 GHz
  • Gain
    • 13dBi typ.
  • Polarization
    • Dual linear-V & H
  • Beamwidth Horizontal
    • 37 deg@ -3dB
  • Beamwidth Vertical
    • 37 deg @ -3dB
  • VSWR
    • <2.0 typ.
  • Impedance
    • 50 Ohm
  • RF Interface
    • 2 x SMA Female
  • Front-to-Back Ratio
    • >20dB
  • Port-to-Port Isolation
    • >30dB

Gain - Azimuth & Elevation - Port 1

Gain - Azimuth & Elevation - Port 2

3D Gain - Port 1

3D Gain - Port 2

Model

EasyLink-300-USWireless Bridge Kit - Two paired Wireless Bridge Units, 2 x 24VDC, 1.5A Power Supplies, 2 x Passive PoE Injectors and 2 x Mounting Kits.
JPole1818" Wall Mount J-Pole
EasyLink-PSU-INJReplacement Power Supply and Gigabit Passive PoE Injector for EasyLink Wireless Bridge Series
Cable 33' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 2525' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 5050' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 150150' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 300330' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
PWR-HHardened Power Supply rated for use in temperatures -40 to 165°F
PoEPowerEZPoE Switch to EasyLink Adapter Hardened -40 to 165°F (Eliminates the need for a power supply)

What's in the Box

2 x Paired Easylink Units, 2 x Wall Power Supplies, 2 x PoE Injectors, 2 x Pole Mounting kit, 2 x Wall Mounting Poles, Quick Install Guide (see picture at top)

Easy

  • Mount units to a pole or wall using included mount kit
  • Signal strength LED's for easy alignment
  • Just power and align using supplied PoE injectors and power supplies
  • No technical expertise needed

Highly Secure

  • Encrypted & Authenticated Wireless Connection (WPA2)
  • Every kit has unique SSID and security settings

Hardened-Grade for Outdoor & Harsh Environments

  • Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
  • Wide operating temperature range (-40 to 167°F)
  • Connections up to 2 miles away

What's Included

  • 2 x units preconfigured to connect with optimal performance up to 300Mbps
  • Includes all Mounting Hardware
  • Includes 2 x power supplies and 2 x PoE injectors

EtherWAN's EasyLink is a pre-configured point to point (PtP) Bridge kit which allows for connecting remote locations wirelessly up to 2 miles away. EasyLink's simple setup allows you to connect locations by mounting the hardware, powering them on and aligning the units using the built-in alignment LEDs. Each kit contains two paired units that connect automatically using a highly secure, unique, hidden SSID and randomly-generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

EtherWAN — "When Connectivity is Crucial."

Wireless

  • Frequency 5 GHz
  • Max data rate 300 Mbit/s
  • Number of chains: 2
  • Standards 802.11a/n
  • WPA2 Passphrase
  • 256-bit AES-CCM Encryption
  • Dynamic Frequency selection

Layer 2 Features

  • Auto-negotiation for port speed and duplex
  • Redundant Protocols (always enabled)
    • IEEE 802.1D STP
    • IEEE 802.1w RSTP
    • IEEE 802.1s MSTP

Interface

  • Ethernet
    • 10/100/1000BASE-T Passive PoE
  • Wireless
    • 802.11a/n
  • LED Indicators

Technology

  • Standards
    • IEEE 802.3 10BASE-T
    • IEEE 802.3u 100BASE-T
    • IEEE 802.3ab 1000BASE-T
    • IEEE 802.3x full duplex and flow control
    • IEEE 802.1D STP
    • IEEE 802.1s MSTP
    • IEEE 802.1w RSTP
    • IEEE 802.11w Management Frame Protection (MFP)
  • Power
    • PoE in (Passive PoE)
    • PoE in input Voltage 6-30V
    • Max power consumption 10W

Physical

  • Casing Material
    • UV Protected Polystyrene case
  • Dimensions
    • 185 x 185 x 63.5mm (W x D x H)
      7.28" x 7.28" x 2.5"
  • Weight (shipping)
    • 5.3lbs (2.4kg)
  • Installation Type
    • Pole/Wall

Environmental

  • Operating Temp.
    • -40 to 75°C (-40 to 167°F)
  • Storage Temp.
    • -45 to 85°C (-49 to 185°F)
  • Relative Humidity
    • 5% to 95% (non-condensing)
  • Wind Survivability
    • 200km/h
      *Power supply rated 5 to 158°F

Regulatory

  • ISO
    • Manufactured in ISO-9001 facility
  • EMI
    • FCC Part 15B Class A
    • PCC Part 15C

Environmental Test Compliance

  • IEC 60068-2-6 Fc (Vibration Resistance)
  • EN 61000-4-3 (Radiated RFI)

Warranty

<

Unit Connected

Unit Mounted

 

Performance

  • VSWR
    • < 2.0@ 5-5.9GHz
  • Dual polarized
    • Horizontal & Vertical
  • High gain
    • Up to 13dBi
  • Front to Back Ratio
    • >20dB
  • Port isolation
    • >30dB

Electrical Specification

  • Frequency Range
    • 5-5.9 GHz
  • Gain
    • 13dBi typ.
  • Polarization
    • Dual linear-V & H
  • Beamwidth Horizontal
    • 37 deg@ -3dB
  • Beamwidth Vertical
    • 37 deg @ -3dB
  • VSWR
    • <2.0 typ.
  • Impedance
    • 50 Ohm
  • RF Interface
    • 2 x SMA Female
  • Front-to-Back Ratio
    • >20dB
  • Port-to-Port Isolation
    • >30dB

Gain - Azimuth & Elevation - Port 1

Gain - Azimuth & Elevation - Port 2

3D Gain - Port 1

3D Gain - Port 2

Model

EasyLink-300-USWireless Bridge Kit - Two paired Wireless Bridge Units, 2 x 24VDC, 1.5A Power Supplies, 2 x Passive PoE Injectors and 2 x Mounting Kits.
JPole1818" Wall Mount J-Pole
EasyLink-PSU-INJReplacement Power Supply and Gigabit Passive PoE Injector for EasyLink Wireless Bridge Series
Cable 33' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 2525' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 5050' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 150150' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
Cable 300330' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
PWR-HHardened Power Supply rated for use in temperatures -40 to 165°F
PoEPowerEZPoE Switch to EasyLink Adapter Hardened -40 to 165°F (Eliminates the need for a power supply)

What's in the Box

2 x Paired Easylink Units, 2 x Wall Power Supplies, 2 x PoE Injectors, 2 x Pole Mounting kit, 2 x Wall Mounting Poles, Quick Install Guide (see picture at top)
history