EL1032T Series

The EL1032T Series provides media conversion between 10/100BASE-T(X) and 100BASE-FX Fiber. Through DIP switch selection, Link-Fault-Pass-Through (LFPT) function can be active or disabled. EL1032T supports IEEE 802.3at PoE/PSE standard and can transmit power and data over one RJ45 cable. The EL1032T's industrial design features high shock/vibration resistance, electrical noise immunity and a wide operating temperature range from -10 to 60°C. EL1032T is the ideal media converter for industrial environments.

EtherWAN — "When Connectivity is Crucial."

Power over Ethernet

» Supports IEEE802.3at PoE/PSE standard and IEEE802.3af PoE/PSE compatible

Dual Power Interfaces

» Supports both terminal block and DC jack for power input selections

Industrial operating temperature range

» From -10°C to 60°C, wide operating temperature is suitable for outdoor cabinet installation

Technology

Standards

• • IEEE 802.3 10BASE-T
• • IEEE 802.3u 100BASE-TX/FX
• • IEEE 802.3af/at PoE/PSE

• • 14,880pps for 10Mbps
• • 148,810pps for 100Mbps

• • 228Kb

• • Store-and-Forward
• • Auto Negotiation
• • Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
• • Auto MDI/MDIX

Power

Input Voltage

• • 48-57VDC

• • Device: Max. 3.6W (without PoE)
• • PoE power budget: 30W Max. (depends on power input)

• • IEEE 802.3at: up to 30W/port, 50-57VDC, 500mA Max.

• • Overload current protection
• • Reverse polarity protection

Mechanical

Casing

• • Aluminum Case

• • 70 x 110 x 30mm (W x D x H)
    (2.76" x 4.33" x 1.18")

• • 0.25Kg (0.55lb.)

• • DIN-Rail (top hat type 35mm), Panel, or Wall mounting

Interface

Ethernet Port

• • 10/100BASE-TX: 1 port
• • 100BASE-FX: 1 port

• • Per Unit: Power
• • Per 10/100TX Port: Link/ACT, full-duplex/collision
• • Per 100FX Port: Link/ACT
• • PoE: PD connect/PD disconnect

Environment

Operating Temperature

• • -10 to 60°C (14 to 140°F)
    Tested @ -20 to 70°C (-4 to 158°F)

• • -40 to 85°C (-40 to 185°F)

• • 5% to 95% (non-condensing)

Regulatory Approvals

ISO

• • Manufactured in an ISO 9001 facility

• FCC Part 15B Class A
• EN 61000-6-4
• EN 55022

• EN 61000-6-2
• • EN 61000-4-2 (ESD Standards)
• • EN 61000-4-3 (Radiated RFI Standards)
• • EN 61000-4-4 (Burst Standards)
• • EN 61000-4-5 (Surge Standards)
• • EN 61000-4-6 (Induced RFI Standards)
• • EN 61000-4-8 (Magnetic Field Standards)

• IEC 60068-2-6 Fc (Vibration Resistance)
• IEC 60068-2-27 Ea (Shock)
• FED STD 101C Method5007.1 (Free fall w/package)

Model

* DIN-Rail mounting kit included.

100FX Fiber Options (X)

* More 100FX Fiber options also available upon request.

Optional Accessories